Stainless steel vertical remote water meter
Technical parameters
Base surface temperature: T30 T90
1. Water pressure: 0.03MPA-1mpa
2. Pressure loss :≤ 0.063mpa
3. Working voltage: RS-485 mode DC12V-24V MBUS mode DC24-36V
4. Current: static current ≤0.6mA working current ≤1.5mA
5. Transmission distance: 1200M
6. Communication rate: 1200Bps -9600bps
7. Communication protocol: DL/645 MODBUS CJ/T188
8. Working environment: 0.1℃-+60℃ humidity ≤95%RH
9. Measurement accuracy: Q3:Q1=50, 80, 100, 125, 160. Optional as required.
10. Reading accuracy: digital reading without blind spots, accuracy of 100%.
11. Communication protocol: in line with CJ/T188-2004 "household metering instrument data transmission technical conditions" requirements.
12. Communication mode: M-bus, communication distance less than or equal to 2km. The bus contact capability is less than or equal to 256 points.
13. Communication power consumption: less than or equal to 500uA.
14. The building installation of the meter to go m-bus, in the building safety position to install building matcher for meter reading.
15. Building matcher for handheld meter reading, its purpose is to check the running state of a single meter, check the line failure, etc.
16. Building matcher can be connected with the network to become a network meter reading. It can also be connected with GPRS to achieve remote wireless meter reading. More direct handheld meter reading into the computer charging system. In addition to the style of the demo table, the photo layout of meter reading, and then configure the computer, wireless meter reading mode display.